news

Part 1．Production safety responsibility system
1.Define the safety responsibilities of persons in charge at all levels, all kinds of engineering personnel, functional departments and employees in production.
2.Establish and improve the responsibility system for production safety of all departments at all levels, and each shall assume its own responsibilities within its own scope of responsibility.
3.Earnestly implement the safety production responsibility system at all levels and departments to escort the development of the enterprise.
4.Sign the safety production responsibility statement every year, and incorporate it into the company’s management objectives and annual work assessment.
5.The “safety Committee” of the company shall deploy, inspect, assess, reward and punish the safety production responsibility system of all departments at all levels every year.

Part 2. safety training and education system
(1)Three-level safety educationAll new workers in production positions must be given safety education at factory (company) level, workshop (gas station) level and shift level before taking up their posts. The time of level 3 safety education shall not be less than 56 class hours. The time of company-level safety education shall not be less than 24 class hours, and the time of gas-station level safety education shall not be less than 24 class hours; The class – group safety education time shall not be less than 8 class hours.
(2)Special operation safety educationPersonnel engaged in special types of work such as electrical, boiler, welding and vehicle driving shall be assigned to the competent departments of the relevant enterprises and the competent departments of the local governmentsThe door organization carries on the professional safety technical education, after the examination wind mouth fear, and the temple, the result is credited to the personal safety education card. According to the relevant provisions of the local safety supervision department, regularly attend training and review, the results are recorded in the personal safety education card.In the new process, new technology, new equipment, new wide production of technology a cut, ancient can be held. Education. After the relevant personnel pass the examination and obtain the safety certificate, they can be operated on duty.
(3) Daily safety educationGas stations must carry out safety activities based on shifts. The safety activities of shifts shall not be less than 3 times a month, and each time shall be no less than 1 class hour. The safety activities of the whole station shall be held once a month, and each time shall be no less than 2 class hours. Time for safe activities shall not be diverted for other purposes.
(4) Safety education for external construction personnelBefore the construction personnel enter the station, the responsible company (or) gas station should sign a safety contract with the construction team to clarify the responsibilities of both parties, implement safety measures, and carry out safety and fire prevention education for the construction personnel.
(5) In safety education, we must establish the leading idea of “safety first, prevention first”.According to the relevant laws, regulations and fire protection laws of gas station safety management, combined with the accident lessons, according to the different positions (see post safety production responsibility system), safety basic skills and common sense training.
Part 3. safety inspection and hidden trouble rectification management system
(1) Gas stations should earnestly implement the policy of “prevention first”, adhere to the principle of self-inspection and self-inspection, and combining supervision and inspection by superior supervisors, and implement the safety work at different levels. A. The gas station shall organize a weekly safety inspection. b. The safety officer on duty shall supervise the operation site, and have the right to stop and report to the superior if illegal behaviors and unsafe factors are found.c. The gas station supervisor company shall conduct a safety inspection on the gas station every month and on major festivals.
(3)The main contents of the inspection include: the implementation of the safety responsibility system, the safety management on the operation site, the equipment and technical status, the fire fighting plan and the rectification of hidden dangers, etc.
(3) If the problems and hidden dangers found in the safety inspection can be solved by the gas station, the rectification shall be made within a time limit; if the gas station is unable to solve the problems, it shall report to the superior in writing and take effective preventive measures. . Establish a security inspection account, register the results of each inspection, the account storage period of one year.
Part 4.the safety inspection and maintenance management system
1. In order to ensure the safety of inspection and maintenance, it must be carried out according to the specified scope, methods and steps, and shall not be exceeded, changed or omitted at will
2. Regardless of overhaul, intermediate repair or minor repair, there must be centralized command, overall arrangement, unified scheduling and strict discipline.
3. Resolutely implement all systems, operate carefully, ensure quality, and strengthen on-site supervision and inspection.
4. In order to ensure the safety of inspection and maintenance, safety and fire equipment must be prepared in good condition before inspection and maintenance.
5. During the inspection and maintenance, follow the guidance of the on-site commanders and safety officers, wear the personal protective equipment well, and do not leave the post without reason, laugh, or throw objects arbitrarily.
6. The removed parts should be moved to the designated place according to the plan. Before going to work, the project progress and environment should be checked first, and if there is any abnormality.
7. The person in charge of maintenance should arrange the safety inspection and maintenance matters at the meeting before the shift.
8. If any abnormal situation is found in the process of inspection and maintenance, it shall report it in time, strengthen the contact, and continue the maintenance only after the inspection and safety confirmation, and shall not be dealt with without authorization.
Part 5. Safe operation management system
1. The application, examination and approval procedures must be handled during the operation, and the location, time, scope, scheme, safety measures and on-site monitoring of the operation must be clearly defined.
2. Strictly abide by the relevant rules and regulations and operating procedures, follow the command of on-site commanders and safety officers, and wear personal protective equipment.
3. No operation is allowed without license or procedures are incomplete, expired operation ticket, implemented safety measures, place or content change, etc.
4. In special operations, the qualification of special operators must be verified and corresponding warnings must be hung
5. Safety and fire fighting equipment and rescue facilities must be prepared before the operation, and special personnel should be designated to handle the fire fighting equipment and facilities.
6. If any abnormal situation is found during the operation, report it immediately and strengthen the contact. The construction can be only continued after the inspection and confirmation of safety, and it shall not be dealt with without authorization.
Part 6. Hazardous chemicals Management system
1.have a sound safety management system and safety production operation procedures.
2. Set up a production safety management organization composed of the main responsible persons of the company, and set up a safety management department.
3. Employees must accept the relevant laws, regulations, rules, safety knowledge, professional technology, occupational health protection and emergency rescue knowledge training, and pass the examination before the post operation.
4.The Company shall set up corresponding safety facilities and equipment in the production, storage and use of hazardous chemicals, and conduct maintenance and maintenance in accordance with the national standards and relevant national regulations to ensure their meeting with the requirements for safe operation.
5.. The Company shall set up communication and alarm devices in the production, storage and use places, and ensure that they are in a normal applicable state under any circumstances.
6.Prepare feasible accident emergency plans, and conduct drills 1-2 times a year to ensure safe production.
7. Protective and anti-virus equipment and treatment drugs must be prepared at the toxic site.
8.The establishment of accident files, in accordance with the “four not let go” requirements, seriously handle, protect effective records.

Part 7. Safety management system of production facilities
1. This system is formulated to strengthen the safety of the equipment, use it correctly, make the equipment is in good condition, and ensure the long-term, safe and stable operation of the equipment.
2. Each workshop shall implement the special plane responsibility system or package mechanism, so that the platform equipment, pipelines, valves and block instruments are responsible for by someone.
3. The operator must pass the three-level training, pass the examination, and be issued a qualification certificate to operate the equipment separately.
4. Operators must start, operate and stop the equipment under strict operating procedures.
5. Must adhere to the post, strictly implement the circuit inspection and carefully fill in the operation records.
6. Do the equipment lubrication work carefully, and strictly abide by the shift handover system. Ensure that the equipment is clean and eliminate the leakage in time

Part 8. Accident management system
1. After the accident, the parties or the finder shall immediately report the place, time and unit of the accident, the number of casualties, the preliminary estimate of the cause, the measures taken after the accident and the accident control situation, and report the relevant departments and leaders to the police. Casualties and poisoning accidents, we should protect the scene and quickly organize the rescue of employees and property. Major fire, explosion and oil running accidents should be formed into the site headquarters to prevent the spread of accidents.
2. For major, major or above accidents caused by oil running, fire and explosion, it shall be quickly reported to the local fire control labor department of the oil station and other relevant departments.
3. Accident investigation and handling should adhere to the principle of “four no exemptions”, that is, the cause of the accident is not identified; the accident responsible person is not handled; the staff is not educated; no preventive measures are not spared.
4. If the accident is caused by the neglect of the production safety, illegal command, illegal operation or violation of labor discipline, the person in charge of the oil station and the person responsible shall be given administrative punishment and economic punishment according to the seriousness of the responsibility. If the case constitutes a crime, the judicial department shall investigate the criminal responsibility according to law.
5. After the accident, if he conceals, intentionally delays, intentionally destroys the scene or refuses to accept or provides relevant information and information, the responsible person shall be given economic punishment or investigated for criminal responsibility.
6. After the accident occurs, an investigation must be conducted. The general accident shall be investigated by the person in charge of the gas station, and the results shall be reported to the relevant safety department and the fire department. For major and above accidents, the person in charge of the gas station should actively cooperate with the public security bureau, safety department, fire bureau and other departments to investigate until the end of the investigation. 7. Establish the accident report handling files, register the location, time and unit of the accident; the brief experience of the accident, the number of casualties; the preliminary estimation of the direct economic loss, the preliminary judgment of the accident cause, the measures taken after the accident and the accident control situation, and the contents of the final handling results.